scripts/sway/displays.pl

#!/usr/bin/perl

########################################################################
# Usage
########################################################################
#
# $ displays.pl [layout] [-w]
#
# layout    Name of desired layout, as configured starting at line 100
#           If missing, last known layout is used (logged to file $last)
# -w        (Re)load waybar only. Skip display configuration. Only kill
#           existing waybars and start new ones for desired layout

########################################################################
# Dependencies
########################################################################
#
# Depends on JSON::XS and Proc::ProcessTable
#
# Debian:
# apt install libjson-xs-perl libproc-processtable-perl

########################################################################
# Directories and Files
########################################################################

# Template is a normal config with the following in place of values:
# "output": __OUTPUT__
# "position": __POSITION__
# "width": __WIDTH__ (optional)
my $waybar_template = "$ENV{'HOME'}/.config/waybar/config.template";

#my $swaysock = "/home/jpm/.config/sway-ipc.sock";
my $swaysock = `ls /run/user/1000/sway-ipc.1000*`;
chomp($swaysock);

# Path to actual config file generated from template
my $waybar_config = "$ENV{'HOME'}/.config/waybar/config";

# File to log and recover last used layout name
my $last = "$ENV{'HOME'}/.config/last_display";

# File to log active outputs (used by swayidle, and to attempt to restore
my $active_outputs = "$ENV{'HOME'}/.config/active_outputs";

########################################################################
# Display Serials and Names
########################################################################

# Hash to match display Serial with a friendly name.
# You can get the serial from (quoted with *):
#   $ swaymsg -t get_outputs
#   Output eDP-1 'Unknown 0x057D *0x00000000*'
my %outputs = (
	#'0x00000101' => 'Sam',
	'HTNCB00059' => 'Sam',
	#'3CQ4342S6W' => 'HP-1',
	'0x00000101' => 'HP-1',
	'3CQ3310Q1Q' => 'HP-2',
        '0x00000000' => 'LVDS',
	'0x00000101' => 'TV',
);

########################################################################
# Display Configurations
########################################################################

# First-level key of hash is the name of each configuration
# Second-level keys are the display friendly-names, above
# Third-level are the actual settings for that display
my %configs = (
        'TV' => {
                'HP-1' => {
                        'on' => 0
                },
                'HP-2' => {
                        'on' => 0
                },
                'Sam' => {
                        'on' => 0
                },
		'TV' => {
			'on' => 1,
                        'width' => 3840,
                        'height' => 2160,
                        'x' => 0,
                        'y' => 0,
                        'rotate' => 0,
			'scale' => 1.333333333,
                        'waybar' => 'top',
			'fallback' => '#000000'
		},
                'eDP-1' => {
                        'on' => 1,
                        'width' => 1920,
                        'height' => 1080,
                        'x' => 3079,
                        'y' => 0,
                        'rotate' => 0,
                        'waybar' => 'bottom',
			'fallback' => '#000000'
                }
        },
        'detached' => {
                'HP-1' => {
                        'on' => 0
                },
                'HP-2' => {
                        'on' => 0
                },
                'Sam' => {
                        'on' => 0
                },
                'TV' => {
                        'on' => 0
                },
                'eDP-1' => {
                        'on' => 1,
                        'width' => 1920,
                        'height' => 1080,
                        'x' => 0,
                        'y' => 0,
                        'rotate' => 0,
                        'waybar' => 'bottom',
			'fallback' => '#000000'
                }
        },
        'stacked-laptop' => {
                'Sam' => {
                        'on' => 1,
                        'width' => 1920,
                        'height' => 1200,
                        'x' => 960,
                        'y' => 0,
                        'rotate' => 0,
                        'waybar' => 'bottom',
			'fallback' => '#000000'
                },
                'HP-1' => {
                        'on' => 1,
                        'width' => 1920,
                        'height' => 1080,
                        'x' => 1920,
                        'y' => 1200,
                        'rotate' => 0,
                        'waybar' => 'top',
			'fallback' => '#000000'
                },
                'HP-2' => {
                        'on' => 0
                },
                'TV' => {
                        'on' => 0
                },
                'eDP-1' => {
                        'on' => 1,
                        'width' => 1920,
                        'height' => 1080,
                        'x' => 0,
                        'y' => 1200,
                        'rotate' => 0,
                        'waybar' => 'bottom',
			'fallback' => '#000000'
                }
        },
        'stacked' => {
                'Sam' => {
                        'on' => 1,
                        'width' => 1920,
                        'height' => 1200,
                        'x' => 960,
                        'y' => 0,
                        'rotate' => 0,
                        'waybar' => 'bottom',
			'fallback' => '#000000'
                },
                'HP-1' => {
                        'on' => 1,
                        'width' => 1920,
                        'height' => 1080,
                        'x' => 1920,
                        'y' => 1200,
                        'rotate' => 0,
                        'waybar' => 'top',
			'fallback' => '#000000'
                },
                'HP-2' => {
                        'on' => 1,
                        'width' => 1920,
                        'height' => 1080,
                        'x' => 0,
                        'y' => 1200,
                        'rotate' => 0,
                        'waybar' => 'top',
			'fallback' => '#000000'
                },
                'TV' => {
                        'on' => 0
                },
                'eDP-1' => {
                        'on' => 0
                }
        },
        'sidebyside' => {
                'HP-1' => {
                        'on' => 1,
                        'width' => 1080,
                        'height' => 1920,
                        'x' => 0,
                        'y' => 225,
                        'rotate' => 270,
                        'waybar' => 'top',
			'fallback' => '#000000'
                },
                'Sam' => {
                        'on' => 1,
                        'width' => 1200,
                        'height' => 1920,
                        'x' => 1080,
                        'y' => 0,
                        'rotate' => 90,
                        'waybar' => 'top',
			'fallback' => '#000000'
                },
                'HP-2' => {
                        'on' => 1,
                        'width' => 1080,
                        'height' => 1920,
                        'x' => 2280,
                        'y' => 225,
                        'rotate' => 90,
                        'waybar' => 'top',
			'fallback' => '#000000'
                },
                'TV' => {
                        'on' => 0
                },
                'eDP-1' => {
                        'on' => 0,
                }
        }
);

my $hostname = `hostname`;
chomp($hostname);
if ($hostname eq "yoga.lan.john.me.tz") {
	$configs{'detached'}->{'eDP-1'}->{'width'} = 2560;
	$configs{'detached'}->{'eDP-1'}->{'height'} = 1440;
	$configs{'detached'}->{'eDP-1'}->{'scale'} = 1.333333;
}


########################################################################
# Disable display from other laptop
########################################################################

if ($ENV{'SSH_AUTH_SOCK'} eq '/home/jpm/.ssh/ssh-agent.sock') {
	foreach my $layout (keys %configs) {
		delete($configs{$layout}{'LVDS'});
	}
        $outputs{'0x00000000'} = 'eDP-1';
} else {
	foreach my $layout (keys %configs) {
		delete($configs{$layout}{'eDP-1'});
	}
}

########################################################################
# Program (do not edit below)
########################################################################

use strict;
use warnings;

my $waybar_only = 0;
my $restore = 0; # Set if no config is provided. Requires validation.
my $config;

if (scalar(@ARGV)) {
        while (@ARGV) {
                my $arg = shift;
                if ($arg eq "-w") {
                        $waybar_only = 1;
                } else {
                        if (defined $config) {
                                die "Too many arguments.\n";
                        }
                        $config = $arg;
                }
        }
}

# Get previous config if one is not provided
unless (defined $config) {
        open(my $fh, '<', $last) ||
                die "Config name not provided and failed to open $last\n";
        $config = <$fh>;
        close($fh);
        chomp $config;
	$restore = 1;
}

# Bail if requested config doesn't exist
if (!defined($configs{$config})) {
	if ($restore) {
		# If restoration is attempted with invalid config, just enable eDP-1
		$config = 'detached';
	} else {
        	die "$config is not a defined configuration: "
                	. join(', ', keys %configs) . "\n";
	}
}

# Write config that is to be used so that it can be recovered as default
open(my $fh, '>', $last) ||
        print STDERR "Config name cannot be written to $last\n";
print $fh $config;
close($fh);


# Fetch connected displays
use JSON::XS;
my $json = JSON::XS->new();
my $displays_raw = `swaymsg -s $swaysock -t get_outputs --raw`;
my $displays = $json->decode($displays_raw);

# For each connected display, collect the desired settings for enabled
# displays and a list of displays to disable
my $on;
my @off;
for (my $i = 0; $i < scalar(@$displays); $i++) {

        # If a display is found without any settings print error and turn it off
        unless (defined $configs{$config}{$outputs{$displays->[$i]->{serial}}}){
                print STDERR "Output $displays->[$i]->{name} ("
                        . $displays->[$i]->{serial}
                        . ") found without defined function. Disabling.\n";
                push @off, $displays->[$i]->{name};
                next;
        }

        # If display is enabled, copy all of the desired settings
        if ($configs{$config}{$outputs{$displays->[$i]->{serial}}}{on}) {
                $on->{$outputs{$displays->[$i]->{serial}}} =
                        $configs{$config}{$outputs{$displays->[$i]->{serial}}};
                $on->{$outputs{$displays->[$i]->{serial}}}{output} =
                        $displays->[$i]->{name};
        # Otherwise simply list it for disabling
        } else {
                push @off, $displays->[$i]->{name};
        }

}

# Verify that all requested displays are actually available
my @unavailable;
foreach my $output (keys %$on) {
	my $found = 0;
	foreach my $o (keys %outputs) {
		if ($outputs{$o} eq $output) {
			$found = 1;
			last;
		}
	}
	unless ($found) {
		push @unavailable, $output;
	}
}
if (scalar(@unavailable)) {
	die "Config requires unavailable output(s) " . join(', ', @unavailable)
		. "\n";
}

# Skip enabling/disabling displays if only running waybar (re)start
unless ($waybar_only) {
        # Number of simultaneous outputs is limited by gpu, so disabled displays
        # first
        foreach (@off) {

                # Sway returns status as JSON
                my $res_raw = `swaymsg -s $swaysock output $_ disable`;
                my $res = $json->decode($res_raw)->[0];

                # If failed, print to STDERR
                unless ($res->{success}) {
                        print STDERR "Error ($res->{error}) in command 'swaymsg"
                                . " -s $swaysock output $_ disable'\n";
                }

        }
}

# Kill existing Waybars
require Proc::ProcessTable;
my $t = new Proc::ProcessTable;
foreach my $p ( @{ $t->table } ) {
        my $cmndline = $p->{'cmndline'};
        $cmndline =~ s/\s*$//g;
        if ($cmndline =~ /^waybar.*/) {
                # Never kill this process
                if ($p->{'pid'} == $$) {
                        next;
                } else {
                        $p->kill(9);
                }
        }
}

# Load in config template
my $template;
if (open (my $fh, '<', $waybar_template)) {
        while (<$fh>) {
                $template .= $_;
        }
        close $fh;
        chomp $template;
} else {
        print STDERR "Failed to load template $waybar_template\n";
}

# If template is already set up as an array, remove the square brackets so that
# we can concatenate multiple displays
$template =~ s/^[^\[\{]*\[(.*)\]$/$1/s;

# Setup waybar config file
my $waybar = '';

# Configure each enabled display
my @active;
foreach my $out (keys %$on) {

        push @active, $on->{$out}->{output};
	unless ($waybar_only) {
                # Build command, starting by enabling and powering on
                my $cmd = "swaymsg -s $swaysock output $on->{$out}->{output}" .
			" enable dpms on";

                # If additional options are provided, add them to command
                if (defined $on->{$out}->{scale}) {
                        $cmd .= " scale $on->{$out}->{scale}";
                } else {
                        $cmd .= " scale 1";
		}
                if (defined $on->{$out}->{rotate}) {
                        $cmd .= " transform $on->{$out}->{rotate}";
                } else {
                        $cmd .= " transform 0";
		}
                if (defined $on->{$out}->{x} && defined $on->{$out}->{y}) {
                        $cmd .= " position $on->{$out}->{x} $on->{$out}->{y}";
                }
                if (defined $on->{$out}->{width} &&
                        defined $on->{$out}->{height} )
                {
                        $cmd .= " mode $on->{$out}->{width}x" .
				"$on->{$out}->{height}";
                }
                if (defined $on->{$out}->{bg} &&
			-f $on->{$out}->{bg})
		{
			$cmd .= " bg $on->{$out}->{bg} fit";
                	if (defined $on->{$out}->{fallback}) {
				$cmd .= " $on->{$out}->{fallback}";
			}
		} elsif (defined $on->{$out}->{fallback}) {
			$cmd .= " bg $on->{$out}->{fallback} solid_color";
		}

                # Sway returns status as JSON
                my $res_raw = `$cmd`;
		print $res_raw . "\n";
                my $res = $json->decode($res_raw)->[0];

                # If failed, print to STDERR
                unless ($res->{success}) {
                        print STDERR "Error ($res->{error}) in command " .
				"'$cmd'\n";
                }
        }

        # Skip waybar setup if template failed to be loaded
        if ( (defined $template) &&
                (defined $on->{$out}->{waybar}) &&
                ($on->{$out}->{waybar} =~ m/(top|bottom|left|right)/) )
        {

                # If there's already a display set up, add a comma
                unless ($waybar eq '') {
                        $waybar .= ',';
                }

                $waybar .= $template;

                # Replace basic preferences
                $waybar =~ s/__OUTPUT__/"$on->{$out}->{output}"/gg;
                $waybar =~ s/__POSITION__/"$on->{$out}->{waybar}"/gg;
                if (defined $on->{$out}->{width}) {
			my $x = $on->{$out}->{width};
			if (defined $on->{$out}->{scale}) {
				$x = sprintf("%.0d", $x / $on->{$out}->{scale});
			}
                        $waybar =~ s/__WIDTH__/$x/gg;
                # If width is not set, comment that line out to use default
                } else {
                        $waybar =~ s/([^\s]*\s*)__WIDTH__/\/\/ $1__WIDTH__/gg;
                }

        }
}

open($fh, '>', $active_outputs);
print $fh join(' ', @active);
close($fh);

# Restore array formatting
$waybar = '[' . $waybar . ']';

# Start Waybar as fork
my $pid = fork;
unless ($pid) {
        open STDIN,  '/dev/null';
        open STDOUT, '>>/dev/null';
        open STDERR, '>>/dev/null';
        # Write config to a temporary file
        open ($fh, '>', $waybar_config);
        print $fh $waybar;
        close $fh;
	my $waydisplay = $ENV{'WAYLAND_DISPLAY'} || 'wayland-0';
        `WAYLAND_DISPLAY=$waydisplay nohup waybar -b waybar0 --config=$waybar_config >> waybar.log; /home/jpm/scripts/waybar/toggle.sh invert`;
}